LONG LASTING AECQ100 MHZ-SMD OSCILLATORS FOR ADAS APPLICATIONS

Clocking specialist PETERMANN-TECHNIK from Landsberg am Lech, offers extremely long lasting and cheap multi-use-automotive oscillators according to AECQ100, for ADAS and ASIL applications, with the series’ LPO-AUT, HTLPO-AUT and WTLPO-AUT. These low power oscillators are available in the frequency range from 1 – 137 MHz, and/or according to the version, in the … read more >>

PROGRAMMABLE OSCILLATORS

Our “LPOP” programmable SMD oscillator series has a frequency range of 1 – 137 MHz. Frequency resolution to up to 6 decimal places is possible. The ultra-low power LPOPs available in a supply voltage range of 1.8 – 3.63 V DC are available in 2.0×1.6, 2.5×2.0, 3.2×2.5, 5.0×3.2 and 7.0×5.0 mm enclosures and with a standard frequency … read more >>

ULTRA LOW POWER 32.768 KHZ OSCILLATORS FOR METERING APPLICATIONS

Time requirements in modern metering applications have massively increased in the last few years. The usual requirement in modern metering applications is a time offset of 1 hour after 7 years. It should also be possible for the operating temperature range of the application to comply with this value. 1 hour max. … read more >>

INEXPENSIVE AUTOMOTIVE SMD OSCILLATORS FOR SECURE WIRING SYSTEMS

The clocking specialists from PETERMANN-TECHNIK are demonstrating how to save a lot of money and set up applications to be secure with the right selection of automotive oscillators. Current situation:  Due to the continually increasing amount of very complex electronics in modern vehicles and the ever higher packing density on miniaturised plates, … read more >>

HOW SMD SILICON CLOCK OSCILLATOR IMPROVES EMC – EMI

Every product designer has to deal with the issue of electromagnetic compatibility (EMC) or electromagnetic interference (EMI) on a daily basis – especially when using frequency-determining components such as quartz oscillators. The ICs installed into quartz oscillators generate steep, sharp-edged flanks and produce strong harmonic overtones. Spread-spectrum oscillators are one solution to … read more >>

SAVING MONEY WITH SMD OSCILLATORS -40/+105°C

The demand for SMD oscillators within the temperature range of -40/+105°C is increasing constantly. More and more -40/+85°C applications are being redesigned for -40/+105°C.

read more >>

SMD QUARTZ 3.2 X 2.5 MM – ONE FOR EVERYTHING!

The SMD quartz of the SMD03025/4 series (3.2 x 2.5 mm/4 pads) from the PETERMANN-TECHNIK product range has developed to be the absolutely most affordable and most variable SMD quartz in a ceramic casing. An all-rounder with excellent values and outstanding reliability.

read more >>

INEXPENSIVE MHZ ULRTA LOW POWER OSCILLATOR FOR BATTERY-POWERED APPLICATIONS

Petermann-Technic is expanding its product range with an exceedingly cost-efficient Ultra-Low-Power SMD MHz Oscillator from the “ULPO” series characterised in particular by extremely low electricity consumption and a very place-saving case.

read more >>

SMD OSCILLATORS 32.768 KHZ CONQUER WEARABLES

Modern wearables based on hibernation technology need to be switched from sleep mode to process mode and back promptly in order to ensure their highly energy-efficient operation.

read more >>

SMD QUARTZ 32.768 KHZ MINI WITH 50 KOHM MAX. RESISTANCE

Clocking specialist PETERMANN-TECHNIK from Landsberg/Lech, Germany, offers a miniature 32,768kHz SMD clock quartz with a reduced resistance of 50kohm in the 3.2 x 2.5mm/4pad MINI SMD ceramic housing of the M3215 series.

read more >>