THE RIGHT CLOCKING FOR EVERY APPLICATION!

PETERMANN-TECHNIK from Landsberg am Lech, currently has the widest and most in-depth product range of frequency determining components, such as quartz, oscillators, silicone oscillators (as an alternative to MEMS), 32.768 kHz , 32,768 kHz solutions, RTCs, ceramic resonators, SAW products, etc. Therefore, PETERMANN-TECHNIK can provide the optimum frequency generating component for every application, … read more >>

LONG LASTING AECQ100 MHZ-SMD OSCILLATORS FOR ADAS APPLICATIONS

Clocking specialist PETERMANN-TECHNIK from Landsberg am Lech, offers extremely long lasting and cheap multi-use-automotive oscillators according to AECQ100, for ADAS and ASIL applications, with the series’ LPO-AUT, HTLPO-AUT and WTLPO-AUT. These low power oscillators are available in the frequency range from 1 – 137 MHz, and/or according to the version, in the … read more >>

SMD QUARTZ SUITABLE FOR ULTRASONIC

Every development and production specialist knows it! Quartz can’t handle ultrasonic welding and cleaning. The quartz resonators are damaged by the high-frequency welding or cleaning process. The clocking specialist PETERMANN-TECHNIK from Landsberg am Lech is the first in the world to present an SMD quartz in miniaturised ceramic housing measuring 3.2×2.5 mm, which … read more >>

PROGRAMMABLE OSCILLATORS

Our “LPOP” programmable SMD oscillator series has a frequency range of 1 – 137 MHz. Frequency resolution to up to 6 decimal places is possible. The ultra-low power LPOPs available in a supply voltage range of 1.8 – 3.63 V DC are available in 2.0×1.6, 2.5×2.0, 3.2×2.5, 5.0×3.2 and 7.0×5.0 mm enclosures and with a standard frequency … read more >>

ULTRA LOW POWER 32.768 KHZ OSCILLATORS FOR METERING APPLICATIONS

Time requirements in modern metering applications have massively increased in the last few years. The usual requirement in modern metering applications is a time offset of 1 hour after 7 years. It should also be possible for the operating temperature range of the application to comply with this value. 1 hour max. … read more >>

INEXPENSIVE AUTOMOTIVE SMD OSCILLATORS FOR SECURE WIRING SYSTEMS

The clocking specialists from PETERMANN-TECHNIK are demonstrating how to save a lot of money and set up applications to be secure with the right selection of automotive oscillators. Current situation:  Due to the continually increasing amount of very complex electronics in modern vehicles and the ever higher packing density on miniaturised plates, … read more >>

HOW SMD SILICON CLOCK OSCILLATOR IMPROVES EMC – EMI

Every product designer has to deal with the issue of electromagnetic compatibility (EMC) or electromagnetic interference (EMI) on a daily basis – especially when using frequency-determining components such as quartz oscillators. The ICs installed into quartz oscillators generate steep, sharp-edged flanks and produce strong harmonic overtones. Spread-spectrum oscillators are one solution to … read more >>

SAVING MONEY WITH SMD OSCILLATORS -40/+105°C

The demand for SMD oscillators within the temperature range of -40/+105°C is increasing constantly. More and more -40/+85°C applications are being redesigned for -40/+105°C.

read more >>

SMD QUARTZ 3.2 X 2.5 MM – ONE FOR EVERYTHING!

The SMD quartz of the SMD03025/4 series (3.2 x 2.5 mm/4 pads) from the PETERMANN-TECHNIK product range has developed to be the absolutely most affordable and most variable SMD quartz in a ceramic casing. An all-rounder with excellent values and outstanding reliability.

read more >>

INEXPENSIVE MHZ ULRTA LOW POWER OSCILLATOR FOR BATTERY-POWERED APPLICATIONS

Petermann-Technic is expanding its product range with an exceedingly cost-efficient Ultra-Low-Power SMD MHz Oscillator from the “ULPO” series characterised in particular by extremely low electricity consumption and a very place-saving case.

read more >>