3.2×1.5mm/2pad 32.768 kHz SMD crystals are available from stock. With 6, 7, 9 or 12.5pF. The frequency tolerance at +25°C is ±20ppm at +25°C, the temperature range -40/+85°C. Contact us via info@petermann-technik. Click here for more information about the product, or if you would like to send an inquiry directly through our … read more >>
In the frequency area of 1 – 137 MHz, the SMD clock oscillators of the “LPO” series, available from the warehouse, have a standard frequency stability of ±20ppm@-40/+85°C. The standard rate of ageing is ±3ppm max. after 10 years. We recommend using the power supply voltage range of 2.25 – 3.63 VDC … read more >>
The low-power, low-cost silicon clock oscillators from our product range are equipped with state-of-the-art IC technology and set the standard in terms of performance, extreme longevity (MTBF 1 billion hours), excellent shock and vibration resistance, size, precision, jitter, power consumption and flexibility. As with other silicon oscillators, our SMD silicon oscillators of … read more >>
Clocking specialist PETERMANN-TECHNIK from Landsberg am Lech, offers extremely long lasting and cheap multi-use-automotive oscillators according to AECQ100, for ADAS and ASIL applications, with the series’ LPO-AUT, HTLPO-AUT and WTLPO-AUT. These low power oscillators are available in the frequency range from 1 – 137 MHz, and/or according to the version, in the … read more >>
Our “LPOP” programmable SMD oscillator series has a frequency range of 1 – 137 MHz. Frequency resolution to up to 6 decimal places is possible. The ultra-low power LPOPs available in a supply voltage range of 1.8 – 3.63 V DC are available in 2.0×1.6, 2.5×2.0, 3.2×2.5, 5.0×3.2 and 7.0×5.0 mm enclosures and with a standard frequency … read more >>
Time requirements in modern metering applications have massively increased in the last few years. The usual requirement in modern metering applications is a time offset of 1 hour after 7 years. It should also be possible for the operating temperature range of the application to comply with this value. 1 hour max. … read more >>
The clocking specialists from PETERMANN-TECHNIK are demonstrating how to save a lot of money and set up applications to be secure with the right selection of automotive oscillators. Current situation: Due to the continually increasing amount of very complex electronics in modern vehicles and the ever higher packing density on miniaturised plates, … read more >>
The demand for SMD oscillators within the temperature range of -40/+105°C is increasing constantly. More and more -40/+85°C applications are being redesigned for -40/+105°C.
read more >>
Petermann-Technic is expanding its product range with an exceedingly cost-efficient Ultra-Low-Power SMD MHz Oscillator from the “ULPO” series characterised in particular by extremely low electricity consumption and a very place-saving case.
read more >>
Modern wearables based on hibernation technology need to be switched from sleep mode to process mode and back promptly in order to ensure their highly energy-efficient operation.
read more >>